Lathes

Viewed products

GH1322 & GH1330 Gear Head Lathe

    £3,650.00 Inc. VAT

    The GH1300 series of metalworking gear head lathes are offered in several versions, single phase or three phase, with metric or imperial lead screws. Guaranteed exceptional Warco quality comes as standard on each one.

    More details

    product description

    Warco GH1322 / GH1330 Gear Head Lathe

    If you're looking for a robust gear head metal lathe, there's a good chance the Warco GH1300 series offers everything you could ever need for a wide range of metalworking applications.

    Offered in several versions with a choice of single/ three phase, with metric or imperial leadscrews, each of them offers unbeatable robustness, precision and accuracy.

     

    Features include:

    • Each machine features induction hardened and ground bedways
    • Hardened, precision ground headstock gears ensure extremely quiet operation
    • D1-4 spindle supported by taper roller bearings
    • Overload clutch to saddle feed shaft
    • Removable gap bed, dowelled for accurate relocation
    • Safe, low voltage circuit with overload cut out
    • Spindle brake, extremely effective, will immediately brake lathe from highest speed of 2000rpm
    • In an emergency situation, the brake will also disconnect the electrical drive
    • Slide out coolant / chip tray
    • Telescopic leadscrew covers
    • Accuracy test report is supplied with each individual machine
    • European electrical components, Siemens or Telemachanique
    • Emergency electric cut out switch
    • Jogging button to assist chuck rotation throughout the speed range
    • Offset tailstock facility
    • Independent feed shaft to saddle for longitudinal and cross feed
    • Adjustable gibs to top slide and cross slide
    • Thread dial indicator
    • Power longitudinal and cross feed, powered by a dedicated feed shaft
    • Interlock chuck guard and gear train cover
    • We can also supply and fit DRO.

     

    Warco GH1322 Lathe

     

    GH1322 illustrated

     

    Standard equipment includes:

    • 160mm 3 Jaw chuck with inside/outside jaws
    • 4 Jaw independent chuck 200mm
    • 4 way toolpost
    • Fixed and travelling steadies
    • Micro adjustable bed stop
    • Coolant system
    • Cabinet stand
    • Halogen low voltage light
    • Dead centres
    • Face plate
    • Complete with instruction manual and full spare parts list.
    • Tool box with maintenance tools

    All of the above items come with each lathe no extra charge.

     

    This range of lathes is ideal for training / teaching establishments and industry alike.  The GH1322 and GH1330 lathes come with a wealth of safety features and standard equipment.

    Long term reliability is assured by high levels of build quality and extremely robust construction.

    Lathes are available in single phase or three phase. All lathes are metric. Machines fitted with DRO also available - ask for more details.

     

    LatheTypeItem Number
    GH1322Metric 1 Phase4009B
    GH1322Metric 3 Phase4009A
    GH1300Metric 1 Phase4069B
    GH1300Metric 3 Phase4069A

     

    • Buy with confidence from Warco - we've been selling lathes just like this for four decades now, and have always prided ourselves on our after sales service. Hugely comprehensive range of spare parts also available should you ever need them.
    • Each machine comes fully guaranteed.
    • Every Warco lathe is fully run and tested by a qualified member of our team before leaving our premises, and is supplied with an individual accuracy test report.

     

    GH1322 / GH1330 Specification:

    Lathe

    GH1322

    GH1330

    Centre height

    165mm

    165mm

    Swing over gap

    476mm

    476mm

    Maximum swing

    330mm

    330mm

    Swing over cross slide

    198mm

    198mm

    Distance between centres

    500mm

    750mm

    Bed width

    185mm

    185mm

    Longitudinal travel

    332mm

    582mm

    Spindle taper

    5MT

    5MT

    Spindle bore

    38mm

    38mm

    Maximum tool size

    16mm

    16mm

    Range of cross feeds

    0.018 - 0.275 mm/r

    0.018 - 0.275 mm/r

    Range of longitudinal feeds

    0.067 - 1.019 mm/r

    0.067 - 1.019 mm/r

    Range of spindle speeds (8)

    70 - 2000 rpm

    70 - 2000 rpm

    Range of metric threads

    0.45 - 10mm

    0.45 - 10mm

    Range of imperial threads

    3 1/2 - 80 tpi

    3 1/2 - 80 tpi

    Tailstock taper

    3MT

    3MT

    Tailstock quill travel

    92mm

    92mm

    Top slide travel

    76mm

    76mm

    Cross slide travel

    160mm

    160mm

    Headstock bearings

    Taper roller

    Taper roller

    Compound slide swivel

    360º

    360º

    Chuck mounting

    Camlock D1-4

    Camlock D1-4

    Motor

    1.5kw (1500w)

    1.5kw (1500w)

    Dimensions L x W x H

    1320 x 610 x 1400mm

    1524 x 610 x 1400mm

    Weight

    500kg

    600kg

    Measurements taken to end of handle grips

     

    Order one of these quality lathes securely online, or call us on 01428 682929.

     

    We don't believe in hidden charges -  price includes VAT at 20% and mainland UK delivery.

     

    Over 40 years of supplying lathes to engineers, industry and education.

    product download

    accessories

    Related products

    TOP