Arbor for Lathes & Drills - 2MT / 3MT / 4MT

Arbor for Lathe & Drill -  2MT / 3MT AND 4MT

Range of quality arbors for use in morse taper machines, in a variety of different sizes.

• Very useful adapter for lathes and drilling machines.

• Ideal for fitting a drill chuck to your lathe tailstock for example.

• We have arbors available to match all our drill chucks and machines.

• Select the  required type from the drop down list above.

Guide to lathe compatibility can be found below.

Types available

Drill chucks to suit these arbors available on these pages: Key drill chucks / Keyless drill chucks

Recommended arbors to fit Warco lathes

• Mini Lathe, Super Mini Lathe

We recommend 2MT B12 Arbor (Item No. 9540 or 8119). 
If you are using the larger B16 chuck, select 2MT B16 Arbor (Item No. 8139A).

• WM 180, WM 240/B, WM 250/V, WM 280V, GH600

We recommend 2MT B16 Arbor (Item No. 8139A).
For larger B18 chuck, select 2MT B18 (8140A).

• WM 290V, GH1230, GH1236, GH1322, GH1330, GH1439 D330 and D320

We recommend 3MT B16 Arbor (Item No. 8148A).
For B18 chuck, 3MT B18 (8141A).

• D400 GH1164 and GH1660

We recommend 4MT B16 Arbor (Item No. 8173).
For B18 chuck, 4MT B18 (8174).

More details

• To select the correct arbor to match a particular drill chuck, the key thing is that the arbor taper matches that of the drill chuck. For example, a B12 drill chuck requires a B12 arbor. A B12 drill chuck would not be compatible with a B16 arbor.

• The tang column in the table above refers to an extended part of the arbor that enables quicker ejection. The advantage of going without a tang on Item No. 9540 (suitable for the Mini Lathe) is that it reduces the length, which is handy on smaller lathes.

Also available

• Arbors for milling machines

• Drill chucks - key type

• Drill chucks - keyless type