Enlarge image
|
5” diameter
Scroll mechanism, key operated
Accepts 5C collets, available metric
2mm - 28mm x 1mm or imperial
1/16” - 1 1/32 x 1/32”
Listed on this page
To mount a collet chuck to your lathe it is necessary to add a backplate. Machining the back plate is best undertaken on your lathe to achieve maximum accuracy. Secure the back plate to the spindle. Skim across the face to ensure squareness, then machine a spigot to match the register of the collet chuck. It is necessary to measure the p.c.d. of the fixing holes in order to secure the chuck to the backplate.
|
